Detailed Product Description

SIGMA Fiber Cement Board contains inorganic raw materials such as cement, silica powder and reinforced cellulose fiber as the main materials. All SIGMA boards are autoclaved to become stable product. SIGMA Fiber Cement Board does not contain any of asbestos fiber, however, it has strong bending strength like those with asbestos. SIGMA Fiber Cement Board can be applied not only for the interior use but also for the outdoor wall system. It has low water absorption rate and high impact resistant ability. These good advantages make it suitable for any purposes of applications.

Properties:
·100% Non-asbestos
·Density: 1300 kg/m3
·Coefficient of thermal expansion: 0.11 kcal/m.hroC
·Bending Strength: over 180 kgf/cm2
·Linear expansion rate: 0.1%
·Water absorption rate: 35%
·Water penetration rate: 0%
·Water content: 8%
·Incombustibility according to CNS 6532 and BS 476
·Two hours of fire rating for6mm wall system with W-CSP Concrete
Advantages:
·Light weight, only 1/3 of total weight compared to RC brick wall
·The wall is solid and firm inside, and resistant to impact pressure.
·Painting, tiling and nailing is possible in the new system
·Noise reduction can be up to 46 db
·Good efficiency, workers can work three times faster compared to RC.
·Working environment can keep it dry and clean for better management.
·Cost of this system will be almost the same as the brick wall.
·Certificates with two hours of fire rating.